TM 9-2320-365-34-2
7-4. TRANSMISSION ASSEMBLY REPLACEMENT (USUAL CONDITIONS) (CONT)
(76) Remove screw (102), oil fill tube clamp (103) and oil
fill tube (51) from main housing module (104).
(77) Remove seal (105) from oil fill tube (51). Discard seal.
NOTE
• Perform step (78) on vehicles equipped with
hydraulic rotary pump.
• Step (78) requires the aid of an assistant.
(78) Remove two screws (106), washers (107), and
hydraulic rotary pump (108) from PTO (109).
NOTE
• Perform steps (79) through (82) on vehicles
equipped with PTO.
• Remove plastic cable ties as required.
• Tag electric connectors and connection points
prior to disconnecting.
(79) Disconnect electrical connectors P216 (110) and P217
(111) from PTO (109).
7-28.10
Change 1
