TM 9-2320-365-34-2
7-4. TRANSMISSION ASSEMBLY REPLACEMENT (USUAL CONDITIONS) (CONT)
NOTE
•
Perform steps (50) through (52) on vehicle
serial number 1478 and higher.
•
Steps (50) and (51) require the aid of an
assistant.
•
During installation of flexplate bolts, access
each flexplate bolt by turning alternator pulley
through a series of short arcs.
(50) Position six bolts (57) in flexplate (58).
(51) Tighten six bolts (57) to 37-45 lb-ft (51-61 N·m).
(52) Install plug (59) in flywheel housing (60).
NOTE
•
Perform steps (53) and (54) on vehicle serial
number 0001 through 1477.
•
Steps (53) and (54) require the aid of an
assistant.
•
During installation of flexplate bolts, access
each flexplate bolt by turning alternator pulley
through a series of short arcs.
(53) Position 12 bolts (61) in flexplate (58).
(54) Tighten 12 bolts (61) to 18-22 lb-ft (24-30 N·m).
NOTE
Perform step (55) and (56) on vehicles
equipped with transmission oil cooler tubes.
(55) Position gasket (62) and flywheel cover (63) on
flywheel housing (60) with four washers (64) and
screws (65).
NOTE
Perform step (56) on vehicles equipped
with transmission oil cooler hoses.
(56) Install gasket (62), flywheel cover (63), and
transmission oil cooler hose bracket (66) on flywheel
housing (60) with four washers (64) and screws (65).
(57) Tighten four screws (65) to 22-26 lb-ft (30-35 N·m).
7-36
Change 1
