TM 9-2320-365-34-2
7-4. TRANSMISSION ASSEMBLY REPLACEMENT (USUAL CONDITIONS) (CONT)
(75) Install dipstick (91) in oil dipstick tube (87).
NOTE
Perform steps (76) through (81) on vehicles
equipped with transmission oil cooler tubes.
(76) Install two preformed packings (92) on 90-degree
fittings (93 and 94).
(77) Position 90-degree fittings (93 and 94) in transmission
(1).
(78) Tighten jam nuts (95) on fittings (93 and 94).
(79) Connect transmission oil cooler tube (96) to 90-degree
fittings (93).
(80) Connect transmission oil cooler tube (28) to 90-degree
fittings (94).
(81) Tighten transmission oil cooler tube (96) and
transmission oil cooler hose (28) to 94-104 lb-ft (127-
141 N·m).
7-40
Change 1