TM 9-2320-365-34-2
WARNING
Control valve module weighs approximately
65 lbs (30 kgs). Position a floor jack under
control module prior to removal. Failure to
comply may result in injury to personnel or
damage to equipment.
(21) Remove 20 screws (36) from control valve module
(30) and main housing module (37).
(22) Position three jacking bolts in control valve module
(30).
CAUTION
Tighten three jacking bolts evenly to break
control valve module free from vehicle. Failure
to comply may result in damage to equipment.
(23) Tighten three jacking bolts on control valve module
(30).
(24) Remove control valve module (30) and gasket (38)
from vehicle. Discard gasket.
NOTE
Perform step (25) on transmissions serial
number 6510032369 and higher.
(25) Remove control valve module (30), gasket (38) and
transmission adapter harness (23) from transmission
(7). Discard gasket.
(26) Remove three jacking bolts from control valve module
(30).
Change 1
7-71
