TM 9-2320-365-34-2
7-17. ENGINE AND TRANSMISSION MOUNT BRACKET REPLACEMENT (CONT)
(3) Remove four bolts (3) from front of LH engine and
transmission mount bracket (4).
(4) Remove two bolts (5) from top of LH engine and
transmission mount bracket (4).
(5) Remove four bolts (6) and LH engine and transmission
mount bracket (4) from transmission (2).
b. LH Installation.
(1) Position LH engine and transmission mount bracket (1)
on transmission (2) with four bolts (3).
(2) Position two bolts (4) in top of LH engine and
transmission mount bracket (1).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
Failure to comply may result in injury to
personnel.
(3) Apply sealing compound to threads of four bolts (5).
(4) Position four bolts (5) on front of LH engine and
transmission mount bracket (1).
7-100
Change 1
