TM 9-2320-365-34-2
7-17. ENGINE AND TRANSMISSION MOUNT BRACKET REPLACEMENT (CONT)
(11) Position lower exhaust pipe (13) on upper exhaust
pipe (10) with clamp (14) and self-locking nut (15).
(12) Tighten self-locking nut (15) to 72-120 lb-in. (8-14
N·m).
(13) Tighten two bolts (6 and 11) to 129-159 lb-ft (175-215
N·m).
(14) Tighten two bolts (5) to 76-94 lb-ft (103-127 N·m).
(15) Tighten four bolts (4) to 330-378 lb-ft (447-513 N·m).
(16) Remove hydraulic jack and wooden block from under
transmission control valve module (16).
c. Follow-On Maintenance.
(1) Start engine (TM 9-2320-366-20-3).
(2) Check exhaust pipe for exhaust leaks, excessive
noise, and vibration.
(3) Shut down engine (TM 9-2320-365-10).
End of Task.
7-106
Change 1
