TM 9-2320-365-34-2
3-2. DRESSED ENGINE UNPACKING/PACKING (CONT)
(48) Position turbocharger inlet coupling (84) on turbocharger
(32) with clamp (83).
CAUTION
A gap of approximately 1/2 inch (1.3 cm) is
required between turbocharger inlet coupling
and alternator. Failure to comply may result
in damage to equipment.
(49) Tighten clamp (83) to 90-100 lb-in. (10-11 N·m).
b. Packing.
(1) Loosen clamp (1) on turbocharger inlet coupling (2).
(2) Remove
turbocharger
inlet
coupling
(2)
from
turbocharger (3).
3-8
