TM 9-2320-365-34-2
3-2. DRESSED ENGINE UNPACKING/PACKING (CONT)
(11) Install plug (22) in oil fill tube (23) with screw (24).
(12) Install two dust plugs (25) in air compressor governor
(26).
(13) Install dust plug (27) in air compressor (16).
(14) Cover bottom of crankcase breather tube (28) with duct
tape.
(15) Install two dust caps (29) on fuel shutoff solenoid (30).
(16) Install dust cap (31) on coolant overflow tube (32) with
clamp (33).
(17) Install dust cap (34) on 90-degree fitting (35).
(18) Install dust cap (36) on coolant bypass tube (37) with
clamp (38).
(19) Install dust plug (39) in fan impeller clutch (40).
(20) Install plastic wrapper (41) on ether sensor connector
(42) with duct tape.
3-10
