TM 9-2320-365-34-2
(43) Remove five bolts (64) from adapter housing module
(65).
NOTE
Transmission lifting bracket is installed with
lift eye top-dead-center facing forward.
(44) Position transmission lifting bracket on adapter housing
module (65) with five bolts (64).
(45) Tighten five bolts (64) to 42-50 lb-ft (57-68 N·m).
WARNING
Transmission assembly weighs
approximately 1300 lbs (590 kgs).
Attach suitable lifting device prior to
removal. Failure to comply may result in
injury to personnel or damage to
equipment.
NOTE
• Perform steps (46) and (47) on vehicles
equipped with PTO.
• Note orientation of 90-degree fitting prior to
removal.
(46) Remove 90-degree fitting (66) from transmission (7).
(47) Remove preformed packing (67) from 90-degree fitting
(66). Discard preformed packing.
NOTE
Steps (48) through (54) require the aid of
an assistant.
(48) Remove 12 bolts (68) and washers (69) from
transmission torque converter housing (70).
Change 1
7-115
