TM 9-2320-365-34-2
3-3. ENGINE ASSEMBLY REPLACEMENT (CONT)
a. Removal.
(1) Remove two self-locking nuts (1), screws (2), and power
steering reservoir bracket (3) from bracket (4). Discard
self-locking nuts.
NOTE
Tag hydraulic hoses and connection points
prior to disconnecting.
(2) Disconnect power steering pressure hose (5) from 90-
degree fitting (6).
(3) Loosen clamp (7) on power steering return hose (8).
(4) Disconnect power steering return hose (8) from tube (9).
(5) Deleted.
(6) Deleted.
(7) Deleted.
(8) Deleted.
(9) Deleted.
(10) Deleted.
(11) Deleted.
(12) Remove adhesive, nut (10), terminal lugs TL55 (11), and
TL12 (12) from starter solenoid (13).
(13) Position nut (10) on starter solenoid (13).
(14) Remove adhesive, nut (14), and terminal lug TL26 (15)
from starter solenoid (13).
(15) Position nut (14) on starter solenoid (13).
3-16
Change 1
