TM 9-2320-365-34-2
13-12. FRONT LIFTING BRACKET REPLACEMENT
This task covers:
a. M1078/M1079 Removal
b. M1078/M0179 Installation
c. M1081 Removal
d. M1081 Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Intake air cleaner removed (TM 9-2320-365-20-3).
Spare tire retainer removed (TM 9-2320-365-20-3).
Radiator overflow tank removed (TM 9-2320-365-20-
3).
Hydraulic reservoir removed, if equipped (TM 9-2320-
365-20-4).
Fuel tank removed (TM 9-2320-365-20-3).
Engine oil fill tube removed (TM 9-2320-365-20-2).
Transmission oil fill tube removed (M1078/M1079)
(TM 9-2320-365-20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Goggles, Industrial (Item 25, Appendix B)
Wrench, Torque 0-600 lb-ft (Item 85, Appendix B)
Wrench Set, Socket (Item 74, Appendix B)
Sling, Cargo (2) (Item 48, Appendix B)
Socket Set, Impact (Item 50, Appendix B)
Tools and Special Tools (Cont)
Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B)
Wrench, Impact, Electric (Item 77, Appendix B)
Materials/Parts
Nut, Self-locking (4) (Item 135, Appendix F)
Nut, Self-locking (16) (Item 134, Appendix F)
(M1078/M1079)
Nut, Self-locking (20) (Item 134, Appendix F)
(M1081)
Bolt (16) (Item 12, Appendix F) (M1078/M1079)
Bolt (20) (Item 12, Appendix F) (M1081)
Washer, Spring Tension (8) (Item 304, Appendix
F)
Personnel Required
(3)
a. M1078/M1079 Removal.
WARNING
Lifting beam weighs approximately 75 lbs (34
kgs). Attach a suitable lifting device prior to
removal. Failure to comply may result in
injury to personnel or damage to equipment.
NOTE
• Left and right side lifting beams are removed the
same way. Right side shown.
• Step (3) requires the aid of an assistant.
(1) Remove two pins (1) and lifting beam (2) from front lifting
bracket (3).
(2) Perform step (1) on left side lifting beam.
13-42
Change 1
