TM 9-2320-365-34-2
b. LH Installation.
WARNING
Frame plate weighs approximately 50 lbs (23
kgs). Attach a suitable lifting device prior to
installation. Failure to comply may result in
damage to equipment or injury to personnel.
NOTE
Steps (1) through (6) require the aid of an
assistant.
(1) Position frame plate (1) on vehicle with 13 bolts (2) and
self-locking nuts (3).
(2) Tighten 13 self-locking nuts (3) to 210-225 lb-ft (285-305
N·m).
(3) Install 90-degree fitting (4) in frame plate (1).
(4) Position four bolts (5) and self-locking nuts (6) in rear
channel (7).
(5) Tighten four self-locking nuts (6) to 210-225 lb-ft (285-
305 N·m).
(6) Install ring (8) in rear channel (7) with self-locking nut
(9).
13-37
