TM 9-2320-365-34-2
13-14. M1078 SUBFRAME RAIL REPLACEMENT (CONT)
b. Installation.
WARNING
Subframe rail weighs approximately 180
lbs (82 kgs).
Attach a suitable lifting
device prior to removal. Failure to comply
may result in injury to personnel or
damage to equipment.
NOTE
• Left and right side subframe rails are installed
the same way. Right side shown.
• Step (1) requires the aid of two assistants.
(1) Position subframe rail (1) on vehicle.
NOTE
Steps (2) through (7) require the aid of an
assistant.
(2) Position six bolts (2) in brackets (3 and 4) with six self-
locking nuts (5).
(3) Tighten six self-locking nuts (5) to 210-225 lb-ft (285-305
N·m).
(4) Position two bolts (6) in bracket (7) with two self-locking
nuts (8).
(5) Tighten two self-locking nuts (8) to 210-225 lb-ft (285-
305 N·m).
13-74
Change 1
