TM 9-2320-365-34-2
13-16. FRONT CROSSMEMBER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Front bumper and gravel deflector removed (TM 9-
2320-365-20-3).
Headlight and headlight housing removed (TM 9-
2320-365-20-3).
Radiator brackets removed (para 13-19).
Front spring brackets removed (Front) (para 14-5).
Check valve removed (TM 9-2320-365-20-3).
Front axle quick release valve removed (TM 9-2320-
365-20-3).
Front gladhands removed (TM 9-2320-365-20-3).
Cab to chassis ground strap removed (TM 9-2320-
365-20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Goggles, Industrial (Item 25, Appendix B)
Tools and Special Tools (Cont)
Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B)
Wrench, Impact, Electric (Item 77, Appendix B)
Socket Set, Impact (Item 50, Appendix B)
Wrench Set, Socket (Item 74, Appendix B)
Sling, Cargo (2) (Item 48, Appendix B)
Materials/Parts
Bolt (10) (Item 15, Appendix F)
Nut, Self-locking (12) (Item 134, Appendix F)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
NOTE
• Steps (1) through (5) require the aid of an
assistant.
• Perform step (1) on left side of front
crossmember.
(1) Remove two collars (1), bolts (2), and bracket (3) from
front crossmember (4). Discard collars and bolts.
13-80
