TM 9-2320-365-34-2(12) Remove three self-locking nuts (22), bolts (23), cab tiltcylinder bracket (21), and plate (24) from right frame rail(25). Discard self-locking nuts.(13) Remove two bolts (26) and right front spring frontbracket (27) from right frame rail (25).b. Front Spring Front Bracket Installation.WARNINGAdhesive sealant MIL-S-46163 can damageyour eyes. Wear safety goggles whenusing; avoid contact with eyes. If sealantcontacts eyes, flush eyes with water andget immediate medical attention. Failureto comply may result in injury topersonnel.NOTEPerform steps (1) through (6) on right sidefront spring front bracket.(1) Apply sealing compound to threads of two bolts (1).(2) Position right front spring front bracket (2) on right framerail (3) with two bolts (1).(3) Tighten two bolts (1) to 195-240 lb-ft (265-325 N·m).(4) Position plate (4) and cab tilt cylinder bracket (5) on rightframe rail (3) with three bolts (6) and self-locking nuts(7).(5) Tighten three self-locking nuts (7) to 210-225 lb-ft (285-305 N·m).14-23
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
