TM 9-2320-365-34-2
Section II. MAINTENANCE PROCEDURES
15-2. CAB REPLACEMENT
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Air tanks drained (TM 9-2320-365-10).
Radiator drained (TM 9-2320-365-10).
WTEC II dashboard cable assembly removed (TM 9-
2320-365-20-3).
WTEC III dashboard cable assembly removed (TM 9-
2320-365-20-3).
Auxiliary panel cable assembly removed, if equipped
(TM 9-2320-365-20-3).
Steering column removed (TM 9-2320-365-20-3).
Foot control valve and brake foot pedal removed (TM
9-2320-365-20-3).
Park control two-way check valve removed (TM 9-
2320-365-20-3).
Throttle control cable removed (TM 9-2320-365-20-3).
Throttle control cable threaded rod removed (TM 9-
2320-365-20-3).
Accelerator pedal removed (TM 9-2320-365-20-3).
Fan and differential lock solenoids removed (TM 9-
2320-365-20-2).
STE-ICE/R cable assembly removed (TM 9-2320-365-
20-3).
Manifold valve assembly removed (TM 9-2320-365-20-
3).
Clearance light cable assemblies removed (TM 9-
2320-365-20-3).
Mirrors removed (TM 9-2320-365-20-4).
Air drop cab liners removed (M1081) (TM 9-2320-365-
20-4).
Cab liners, removed (TM 9-2320-365-20-4).
Cab floor covering removed (TM 9-2320-365-20-4).
Warning light cable removed (TM 9-2320-365-20-3).
Warning light kit removed, if equipped (TM 9-2320-
365-10).
Chemical kit alarm cable removed, if equipped (TM 9-
2320-365-20-3).
Roof hatch removed (TM 9-2320-365-20-4).
Equipment Conditions (Cont)
Machine gun ring kit removed, if equipped (para
19-2).
Windshield wipers and linkage removed (TM 9-
2320-365-20-4).
Cab windshield and side windows removed (para
15-7).
Horn removed (TM 9-2320-365-20-3).
Fenders and mud flaps removed (TM 9-2320-
365-20-4).
Placards removed, as required (TM 9-2320-365-
20-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Wrench, Torque, 0-150 lb-in. (Item 79, Appendix
B)
Wrench, Torque, 0-175 lb-ft (Item 80, Appendix
B)
Wrench, Torque, 0-600 lb-ft (Item 85, Appendix
B)
Puller, Mechanical (Item 45, Appendix B)
Tool Kit, Blind Rivet (Item 66, Appendix B)
Bar, Spreader (Item 16, Appendix D)
Sling, Cargo (Item 48, Appendix B)
Stand, Cab Maintenance (Item 4, Appendix D)
Tool, Cab Support (Item 5, Appendix D)
Wrench Set, Socket (Item 74, Appendix B)
Wrench Set, Socket (Item 75, Appendix B)
Dispenser, Sealant (Item 13.1, TM 9-2320-366-
20 Appendix B)
Materials/Parts
Rubber Strip 150 in. (382 cm) (Item 251,
Appendix F)
Adhesive (Item 10.1, Appendix F)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 31, Appendix C)
15-2
Change 1
