TM 9-2320-365-34-2
15-2. CAB REPLACEMENT (CONT)
(40) Connect two hoses (59) to 90-degree fittings (60).
(41) Connect two hoses (61) to 45-degree fittings (62).
(42) Connect hose (63) to tee fittings (64).
(43) Install terminal lugs TL201 (65) and TL202 (66) on air
pressure transmitter (67) with two lockwashers (68) and
nuts (69).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(43.1) Apply sealing compound to nuts (69), lockwashers (68),
and terminal lugs TL201 (65) and TL202 (66).
NOTE
Perform steps (47) and (48) on vehicle serial
number 7748 and higher and vehicle serial
numbers 0001 through 7447 that have
previously had front lights cable assembly
replaced.
(43.2) Install boot (69.1) on lower pressure transmitter (69).
(43.3) Apply antiseize to holes TLR and TTR and around edges
of boot (69.1).
15-52
Change 1
