TM 9-2320-365-34-2
(43) Remove clip (76) and throttle control cable (77) from
stud (78).
NOTE
Count the number of threads showing on
throttle cable ferrule and record this number
prior to removal.
(44) Loosen nut (79) on throttle control cable ferrule (80).
(45) Remove throttle control cable (77) from bracket (81).
(46) Position throttle control cable (77) clear of any
interference.
(47) Match mark universal joint (82) to steering gear (83).
(48) Remove self-locking nut (84) and screw (85) from
universal joint (82). Discard self-locking nut.
(49) Remove two screws (86) from left side bearing housing
(87).
(50) Perform step (49) on right side bearing housing.
(51) Disconnect three pneumatic hoses (88) from 45-degree
fittings (89).
15-65
