TM 9-2320-365-34-2
NOTE
Perform steps (48.2) and (48.3) on vehicle
serial number 7448 and higher and vehicle
serial numbers 0001 through 7447 that have
previously had front lights cable assembly
replaced.
(48.2) Install boot (62.1) on low pressure transmitter (59).
(48.3) Apply antiseize to holes TLR and TTR and around edges
of boot (62.1).
(49) Connect pneumatic hose (62) to fitting (63).
(50) Connect two pneumatic hoses (64) to 45-degree fittings
(65).
(51) Connect connectors P5 (66) and P6 (67) to horn (68).
NOTE
Vehicle serial numbers 0001 through 1477
have a smaller diameter ground stud than
vehicle serial numbers 1478 and higher.
Vehicle serial number will determine which
self-locking nut to use.
(52) Install lockwasher (69), ground strap (70), washer (71),
and self-locking nut (72) on ground stud (73).
Change 1
15-80.1/(15-80.2 Blank)
