TM 9-2320-365-34-2
15-8. CARGO BED REPLACEMENT
This task covers:
a. M1078 Removal
b. M1078 Installation
c. M1081 Removal
d. M1081 Installation
e. Hinge Removal.
f. Hinge Installation.
g. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Ladder removed (TM 9-2320-365-10).
Light material handling crane (LMHC) removed, if
equipped (TM 9-2320-365-20-5)
Troop seats removed, if equipped (TM 9-2320-365-
10).
Cargo cover removed, if equipped (TM 9-2320-365-
10).
Cargo bed side panels removed, if equipped (TM 9-
2320-365-10).
Cargo arctic heater removed, if equipped (para 18-3).
Air drop brackets removed (M1081) (TM 9-2320-365-
10).
Rear fenders and splash guards removed (TM 9-
2320-365-20-4).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Wrench, Torque 0-175 lb-ft (Item 80, Appendix B)
Wrench, Torque 0-600 lb-ft (Item 85, Appendix B)
Sling, Cargo (2) (Item 48, Appendix B)
Wrench, Torque, 0-300 lb-in. (Item 83, Appendix B)
Goggles, Industrial (Item 25, Appendix B)
Socket Set, Impact (Item 50, Appendix B)
Tools and Special Tools (Cont)
Wrench, Impact, Electric (Item 77, Appendix B)
Wrench Set, Socket (Item 74, Appendix B)
Vise, Machinist (Item 72, Appendix B)
Materials/Parts
Nut, Self-locking (16) (Item 128, Appendix F)
(M1078)
Nut, Self-locking (14) (Item 134, Appendix F)
(M1081)
Bolt (16) (Item 2, Appendix F) (M1078)
Bolt (14) (Item 5, Appendix F) (M1081)
Lockwasher (24) (Item 111, Appendix F) (M1081)
Nut, Self-locking (4) (Item 148, Appendix F)
(M1081)
Nut, Self-locking (4) (Item 132, Appendix F)
Rivet, Blind (12) (Item 249.1, Appendix F)
Personnel Required
(4)
References
TM 43-0139
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
a. M1078 Removal.
NOTE
Left and right fenders and mudflaps are
removed the same way. Right side shown.
(1) Remove three nuts (1), washers (2), spacers (3), screws
(4), and mudflap (5) from bumper (6).
15-120
Change 1
