TM 9-2320-365-34-2
15-8. CARGO BED REPLACEMENT (CONT)
(8) Position mudflap (10) on bumper (11) with three screws
(12), spacers (13), washers (14), and nuts (15).
(9) Tighten three nuts (15) to 18-22 lb-ft (24-30 N·m).
(10) Perform steps (5) through (8) on left side fender and
mudflap.
c. M1081 Removal.
NOTE
Left and right fenders and mudflaps are
removed the same way. Right side shown.
(1) Remove three nuts (1), washers (2), spacer (3), screw
(4), and mudflap (5) from bumper (6).
(2) Remove two nuts (7), four washers (8), two screws (9),
and fender (10) from bracket (11).
(3) Perform steps (1) and (2) on left side fender and
mudflap.
15-124
