TM 9-2320-365-34-2
(8) Remove bushing (6) from bearing retainer (2).
(9) Remove gear (7) from converter housing (3).
(10) Remove two gaskets (8) from gear (7). Discard gaskets.
WARNING
Use care when removing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure to
comply may result in injury to personnel.
NOTE
Perform steps (11) and (12) on drive hubs
with six splines.
(11) Remove two retaining rings (9) from drive hub (10).
(12) Remove drive hub (10) from gear (7). Discard drive hub
and gear.
21-31
