TM 9-2320-365-34-2
c. Assembly.
NOTE
Apply lubricating oil to all parts during
assembly.
(1) Install bushing (1) in sleeve (2).
(2) Install sleeve (2) in C6 clutch housing (3).
(3) Install seal rings (4 and 5) and C6 piston (6) in C6 clutch
housing (3).
WARNING
Use care when installing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to comply may result in injury to
personnel.
(4) Install spring retainer (7) in C6 clutch housing (3) with
retaining ring (8).
(5) Install thrust bearing (9) in C6 clutch housing (3).
(6) Install five C6 reaction plates (10) and C6 friction plates
(11), alternately, starting with C6 reaction plate on drive
hub (12).
(7) Position C6 drive hub (12) in C6 clutch housing (3).
(8) Install C6 backing plate (13) in C6 clutch housing (3).
CAUTION
If transmission is prior to S/N 6510072173, C6
thrust bearing must be replaced.
Failure to
comply may result in damage to equipment.
(9) Install retaining ring (14) in C6 clutch housing (3).
d. Follow-On Maintenance.
Assemble transfer case module (para 22-3).
End of Task.
21-69
