TM 9-2320-365-34-222-4. TRANSFER CASE HOUSING REPAIR (CONT)(15) Rotate transfer case housing (2) until open end is facingup.CAUTIONEnsure center idler, upper drive, and lowerdriven gears with bearing cones are seated intransfer case housing. Failure to comply mayresult in damage to equipment.NOTEInstall idler gear with threaded hole towardtransfer case housing.(16) Install center idler gear (17) in transfer case housing (2).(17) Install upper drive gear (19) in transfer case housing (2).(18) Install lower driven gear (21) in transfer case housing (2).WARNINGTransfer case cover weighs approximately 75lbs (34 kgs). The aid of an assistant isrequired to safely lift it. Failure to complymay result in injury to personnel or damageto equipment.NOTEStep (19) requires the aid of an assistant.(19) Install gasket (22) and transfer case cover (9) on transfercase housing (2).(20) Position 15 bolts (23) in transfer case housing (2).(21) Tighten 15 bolts (23) to 44-55 lb-ft (60-75 N·m).(22) Rotate transfer case cover (9) until transfer case housing(2) is facing up.22-18
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
