22-4. TRANSFER CASE HOUSING REPAIR (CONT)
If reading is not within tolerance, disassemble
bearing retainer or idler gear cover on
transfer case cover side. Replace shim(s)
with proper thickness to get correct end play.
Repeat steps (28) through (33) and steps (1)
through (6) above.
(7) Install gasket (4) and seal washer (5) on idler gear cover
(8) Position idler gear cover (6) on transfer case cover (2)
with five bolts (7).
(9) Tighten five bolts (7) to 44-55 lb-ft (60-75 N·m).
e. Follow-On Maintenance.
Assemble transfer case module (para 22-3).
End of Task.