TM 9-2320-365-34-2
7-4. TRANSMISSION ASSEMBLY REPLACEMENT (USUAL CONDITIONS) (CONT)
WARNING
Extreme caution must be used when
raising transmission under vehicle.
Transmission/ differential lift must be tilted
back towards rear of vehicle and raised at
the same time. Failure to comply may
result in serious injury or death to
personnel or damage to equipment.
NOTE
•
Perform steps (37) through (40) on
transmission serial number 6510032369 and
higher.
•
Steps (37) and (38) require the aid of two
assistants.
(37) Raise transmission (1) in position between LH and RH
engine and transmission mount brackets (41 and 42).
(38) Position four bolts (43) in LH engine and transmission
mount bracket (41).
(39) Position four bolts (43) and bracket (44) in RH engine
and transmission mount bracket (42).
(40) Tighten eight bolts (43) to 330-378 lb-ft (448-513 N·m).
NOTE
•
Perform steps (41) through (43) on
transmission serial numbers prior to
6510032369.
•
Steps (41) and (42) require the aid of two
assistants.
(41) Raise transmission (1) in position between LH and RH
engine and transmission mount brackets (41 and 42).
(42) Position four bolts (43) in LH and RH engine and
transmission mount brackets (41 and 42).
(43) Tighten eight bolts (43) to 330-378 lb-ft (448-513 N·m).
7-34
Change 1
