TM 9-2320-365-34-2
(44) Position 12 washers (45) and bolts (46) in torque
converter housing module (47).
(45) Tighten 12 bolts (46) to 37-45 lb-ft (50-61 N·m).
(46) Install 90-degree fittings (48 and 49) in secondary air
tank (50).
(47) Connect air hose (51) to 90-degree fitting (48).
(48) Connect air hose (52) to 90-degree fitting (49).
NOTE
Perform step (49) on vehicles equipped
with hydraulic rotary pump.
(49) Connect hydraulic hoses (53 and 54) to fitting (55) and
90-degree fitting (56).
Change 1
7-35
