TM 9-2320-365-34-2
7-10. CONTROL VALVE MODULE REPLACEMENT (CONT)
(12) Connect scavenge pump hydraulic return hose (21) to
45-degree fitting (22).
(13) Install seal (23) on oil dipstick tube (24).
(14) Install oil dipstick tube (24) in transmission (25).
NOTE
Perform step (15) on serial number
6510032369 and higher.
(15) Install bolt (26) in clamp (27).
NOTE
Perform step (16) on serial numbers prior to
6510032369.
(16) Install bolt (26) in clamp (27) and wiring harness clamp
(28) on transmission (25).
(17) Install lower exhaust pipe (29) and clamp (30) on
upper exhaust pipe (31).
(18) Position self-locking nut (32) on clamp (30).
(19) Tighten self-locking nut (32) to 89-109 lb-in. (10-12
N·m).
7-74
