TM 9-2320-365-34-2
13-7. SHOCK MOUNT CROSSMEMBER REPLACEMENT (CONT)
(11) Position shock absorber (18) on lower bracket (19) with
bolt (20), two washers (21), and self-locking nut (22).
(12) Position bolt (23) and shock absorber (18) in shock
mount crossmember (1) with washer (24) and self-
locking nut (25).
(13) Tighten nuts (22 and 25) to 195-239 lb-ft (264-324 N·m).
(14) Perform steps (1) through (13) on right side of shock
mount crossmember.
NOTE
Perform steps (15) through (18) on RH side.
(15) Position screw (26) in frame rail (27) with lockwasher
(28) and self-locking nut (29).
(16) Tighten self-locking nut (29) to 84-108 lb-in (10-12 N·m).
(17) Position clamp (30) and lug terminal TL92 (31) on screw
(26) with self-locking nut (32).
(18) Tighten self-locking nut (32) to 84-108 lb-in. (10-12 N·m).
13-22