TM 9-2320-365-34-2
15-2. CAB REPLACEMENT (CONT)
WARNING
• Standard cab weighs approximately 1400 lbs
(636 kgs). M1081 cab weighs approximately
1700 lbs (772 kgs). Attach a suitable lifting
device prior to removal. Failure to comply
may result in injury to personnel or damage
to equipment.
• Cab may swing forward slightly when screws
are removed. An assistant is required to
steady cab. Failure to comply may result in
injury to personnel or damage to equipment.
NOTE
Left and right side cab front support mounts are
disconnected the same way. Right side shown.
(42) Remove four screws (80) from cab front support mount
(81).
(43) Remove two screws (82) and washers (83) from cab
front support mount (81).
(44) Perform steps (42) and (43) on left side cab front support
mount.
15-12
Change 1
