TM 9-2320-365-34-2
15-2. CAB REPLACEMENT (CONT)
(47) Remove 12 expansion nuts (96) from dashboard (4).
NOTE
Perform step (48) on all models except
M1081.
(48) Remove 13 rubber plugs (97) and two rubber plugs (98)
from dashboard (4). Discard rubber plugs.
NOTE
Perform step (49) on M1081.
(49) Remove 13 rubber plugs (97) and four rubber plugs (98)
from dashboard (4). Discard rubber plugs.
NOTE
Left and right door seals, check valve boots,
and door strike catch plates are removed the
same way. Left side shown.
(50) Remove door seal (99) from cab (23). Discard door
seals.
(51) Remove ventilation check valve boot (100) from door
posts (101).
(52) Remove three screws (102), door catch strike plate
(103), shim (104), and threaded plate (105) from door
post (99).
(53) Perform steps (50) through (52) on right side.
15-24