TM 9-2320-365-34-2
15-2. CAB REPLACEMENT (CONT)
(3) Install 36 clinch nuts (4) in cab clearance and marker
light (5) mounting holes.
(4) Install four plastic plugs (6) in cab (2).
(5) Install grille clip-on nut (7) on cab (2).
(6) Install two grille expansion nuts (8) on cab (2).
NOTE
Perform steps (7) through (9) on M1081.
(7) Position three mounting brackets (9) on cab (2) with 12
screws (10).
(8) Tighten 12 screws (10) to 36-44 lb-in. (4-5 N·m).
(9) Install davit (11) in mounting brackets (9).
(10) Install 10 plastic plugs (12) in cab (2).
15-28