TM 9-2320-365-34-2
NOTE
Tighten screws so cab latch can be moved
with some resistance.
(11) Position two cab latches (13) on cab (2) with four
washers (14) and screws (15).
(12) Deleted.
NOTE
Perform step (12.1) on vehicles 7168 and
higher.
(12.1) Position latch bracket (16) on cab (2) with two washers
(17), screws (19), and self-locking nuts (20).
NOTE
Perform step (13) on vehicles 0001 through
7167.
(13) Position latch bracket (16) on cab (2) with two washers
(17), spacers (18), screws (19), and self-locking nuts
(20).
(14) Position three washers (21) and screws (22) in cab latch
bracket (16).
(15) Tighten three screws (22) and two self-locking nuts (20)
to 34-44 lb-ft (44-60 N·m).
(16) Deleted.
Change 1
15-29
