TM 9-2320-365-34-2
15-2. CAB REPLACEMENT (CONT)
(17) Install spring washer (14) and control cam (15) in cab
tilt cylinder (16) with matchmarks aligned.
CAUTION
Align arrow on top of tilt cylinder to point
toward front of cab. Failure to comply may
result in damage to equipment.
(18) Position cab tilt cylinder (16) in tilt cylinder mounting
bracket (17).
(19) Position cab tilt cylinder mounting bolt (18) in tilt cylinder
mounting bracket (17) and tilt cylinder (16) with self-
locking nut (19).
(20) Tighten self-locking nut (19) to 180-232 lb-ft (244-315
N·m).
15-46