TM 9-2320-365-34-2
(38.1) Connect hose (49.1) to fitting (13.4).
(39) Position 12 washers (50) and bolts (51) in flywheel
housing (13.3).
(40) Tighten 12 bolts (51) to 33-47 lb-ft (45-64 N·m).
NOTE
Perform steps (41) through (43) on vehicles
serial number 1478 and higher.
(41) Remove plug (53) from flywheel housing (13.3).
NOTE
• Steps (42) and (43) require the aid of an
assistant.
• Flexplate bolts can be accessed by turning
alternator pulley through a series of short arcs.
(42) Position six bolts (54) in flexplate (55).
(43) Tighten six bolts (54) to 37-45 lb-ft (61-67 N·m).
Change 1
3-41
