TM 9-2320-365-34-2
c. Door Side Window Removal.
(1) Position windshield setting tool under upper corner of
door side window seal (1).
CAUTION
Windshield setting tool must be moved around
edge of window as window is removed. Failure
to comply may result in damage to equipment.
(2) Lift seal (1) around window (2).
(3) Apply outward pressure to window (2).
(4) Remove window (2) from door (3).
(5) Remove seal (1) from window (2).
d. Windshield Installation.
WARNING
Use
caution
when
working
with
windshield on the table or in the cab
frame. Failure to comply may result in
injury to personnel or damage to
equipment.
(1) Position windshield (1) on table with cab interior side of
windshield facing up.
(2) Install seal (2) on windshield (1).
Change 1
15-116.3
