TM 9-2320-365-34-2
(18) Remove relief vent (30) from motor end support (4).
(19) Remove preformed packing (31) from motor end support
(4). Discard preformed packing.
(20) Remove 20 screws (32), lockwashers (33), and motor
end flange (21) from ring gear (34).
Discard
lockwashers.
(21) Remove preformed packing (35) from motor end flange
(21). Discard preformed packing.
(22) Remove shaft seal (36) and ball bearing (37) from motor
end flange (21). Discard shaft seal.
(23) Remove two magnetic plugs (38) from motor end flange
(21).
(24) Remove cable wedge (39) from motor end flange (21).
16-5
