TM 9-2320-365-34-2
16-2. 11K SELF-RECOVERY WINCH (SRW) ASSEMBLY REPLACEMENT/REPAIR
(CONT)
(12) Remove eight bolts (17), lockwashers (18), and motor
end support (4) from two base mounts (19). Discard
lockwashers.
(13) Remove primary sun gear (20) from motor end flange
(21).
WARNING
Use care when removing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to comply may result in injury to
personnel.
(14) Remove retaining ring (22) and ball bearing (23) from
primary sun gear (20).
(15) Remove locator pin (24), compression spring (25), and
shifter round knob (26) from arm shifter (15). Discard
compression spring.
(16) Remove spring pin (27) and arm shifter (15) from
shouldered shaft (28). Discard spring pin.
(17) Remove two preformed packings (29) from shouldered
shaft (28). Discard preformed packings.
16-4