TM 9-2320-365-10
(12) Install washer (21), bolt (22), and washer (23) in subframe (8) with slotted nut (24).
(13) Install lynch pin (25) in bolt (22).
(14) Perform steps (12) and (13) on opposite side of subframe (8).
b. Van Body Installation.
(1) Remove lynch pin (1) from bolt (2).
(2) Remove slotted nut (3), washer (4), and washer (5) from subframe (6).
(3) Perform steps (1) and (2) on opposite side of subframe (6).
Change 1
2-362.5
