TM 9-2320-365-10
2-58. PREPARATION FOR INTERNAL AIR TRANSPORT (CONT)
NOTE
Left and right van body mounting hardware is installed the same way.
Left side shown.
(9) Install spring (11), stud (8), two washers (10), and slotted nuts (9) in subframe (6).
(10) Install two lynch pins (7) in stud (8).
(11) Install washer (5), bolt (2), washer (4), and slotted nut (3) in subframe (6).
(12) Install lynch pin (1) in bolt (2).
(13) Perform steps (9) through (12) on right side of van body.
2-362.8
Change 1
