TM 9-2320-365-34-1
Figure D-8. Cab Maintenance Stand Brace to Base Assembly
l. At left side of base (1) LH, place middle Brace B on the base as shown in Figure D-8. Cab Maintenance Stand
Brace to Base Assembly.
m. Using angle bracket (9) on base as a template, mark holes on Brace B and match drill 0.38 in. (9.6 mm) hole
through Brace B brace (4) as shown in Figure D-8. Cab Maintenance Stand Brace to Base Assembly.
n. Secure Brace B to base spreader (3) using 2 bolts (11), flat washers (13), lockwashers (14), and hex nuts (15).
o. Repeat steps m-n for front Brace B.
D-13
