KNOWN INFO                         TEST OPTIONS            Continuity Test or STE/ICE-R Test #91     REASON FOR QUESTION     INITIAL SETUP Equipment Condition     Engine shut down (TM 9-2320-365-10).     Batteries disconnected (TM 9-2320-365-20-3).   Tools and Special Tools     Tool Kit, Genl Mech (Item 68, Appendix B)     STE/ICE-R (Item 60, Appendix B)     Multimeter, Digital (Item 34, Appendix B)     Goggles, Industrial (Item 25, Appendix B)     Wrench, Torque, 0-200 lb-in. (Item 81, Appendix B) Materials/Parts   Wire, Elect, 50 ft (Item 94, Appendix C) Personnel Required     (2) References     TM 9-4910-571-12&P WARNING 1.       CAUTION       Read WARNING and CAUTION on following page. START 2-276          Change 1 TM 9-2320-365-34-1 c20. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN        CODE 41, 42, 44, AND/OR 45 SUB CODE 15 (SERIAL NUMBER 6510032369 AND        HIGHER)        POSSIBLE PROBLEMS        Circuit breaker OK. Batteries OK. WTEC II cab transmission harness OK. Faulty transmission external wiring harness. Faulty transmission internal wiring harness. Faulty D solenoid. Faulty WTEC II TEPSS. Is continuity present from connector P119-W to external wiring harness 31-pin connector pin M? If continuity is not present, transmission external wiring harness is faulty. Replace transmission external wiring harness (para 6-7). YES NO