TM 9-2320-365-34-2
3-9. CRANKSHAFT REAR SEAL REPLACEMENT (CONT)
b. Cleaning/Inspection.
WARNING
Dry Cleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective goggles and
gloves; use only in well ventilated area; avoid contact with skin, eyes, and clothes, and do
not breathe vapors. Keep away from heat or flame. Never smoke when using Dry Cleaning
Solvent; the flashpoint for Type I Dry Cleaning Solvent is 100°F (38°C) and for Type II is
130°F (50°C). Failure to comply may result in serious injury or death to personnel.
If personnel become dizzy while using Dry Cleaning Solvent, immediately get fresh air and
medical help. If Dry Cleaning Solvent contacts skin or clothes, flush with cold water. If Dry
Cleaning Solvent contacts eyes, immediately flush eyes with water and get immediate
medical attention. Failure to comply may result in injury to personnel.
Clean seal seating surface (1) thoroughly with dry cleaning
solvent.
c. Installation.
NOTE
Two screws are tightened finger tight.
(1) Position rear locator on crankshaft (1) with two screws.
3-82
Change 1
