TM 9-2320-365-34-2
WARNING
Use care when removing springs. Springs
are under tension and can act as
projectiles when removed.
Failure to
comply may result in injury to personnel.
(3) Remove plug (7), spring (8), and bypass valve (9) from
oil filter base (4).
(4) Remove preformed packing (10) from plug (7). Discard
preformed packing.
b. Installation.
NOTE
Apply lubricating oil to all parts during
assembly.
(1) Install bypass valve (1) and spring (2) in oil filter base
(3).
(2) Install preformed packing (4) on plug (5).
(3) Install plug (5) in oil filter base (3).
(4) Install three preformed packings (6) on oil filter base (3).
(5) Position oil filter base (3) on engine (7) with five washers
(8), two bolts (9), and three screws (10).
(6) Tighten two bolts (9) and three screws (10) to 15-25 lb-ft
(20-34 N·m).
3-117
