TM 9-2320-365-34-2
3-17. OIL PUMP REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-on Maintenance
INITIAL SETUP
Equipment Conditions
Oil pan removed (para 3-16).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B)
Goggles, Industrial (Item 25, Appendix B)
Wrench Set, Socket (Item 75, Appendix B)
Tools and Special Tools (Cont)
Gloves, Rubber (Item 23, Appendix B)
Materials/Parts
Gasket (Item 61, Appendix F)
Packings, Preformed (2) (Item 193, Appendix F)
Lockwasher (Item 99, Appendix F)
Solvent, Dry Cleaning (Item 81, Appendix C)
WARNING
Wear appropriate eye protection when
working under vehicle. Falling debris may
cause eye injury. Failure to comply may
result in injury to personnel.
a. Removal.
(1) Remove two screws (1) and washers (2) from pick-up
tube bracket (3).
(2) Remove two screws (4), washers (5), oil pick-up tube
(6), and gasket (7) from oil pump (8). Discard gasket.
(3) Remove two screws (9), oil discharge tube (10), and two
preformed packings (11) from oil pump (8). Discard
preformed packings.
(4) Remove two screws (12), lockwashers (13), and oil
pump (8) from engine (14). Discard lockwashers.
3-114
