TM 9-2320-365-34-2
4-4. FUEL SETTING CHECK
This task covers:
a. Fuel Setting Check
b. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Valve cover removed (TM 9-2320-365-20-2).
Fuel shutoff solenoid removed (para 6-4).
Fuel injectors synchronized (para 4-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Tool Kit, Intl. Comb. Eng. (TM 9-2320-365-20)
Wrench, Torque, 0-60 N·m (Item 84, Appendix B)
a. Fuel Setting Check.
CAUTION
Injector spring compressor must be installed on
all fuel injectors that have the rocker arms
removed.
Failure to comply may result in
internal damage to fuel injectors.
NOTE
Hold rocker arm assembly level when removing
from engine to prevent disassembly.
(1) Remove four bolts (1) from No. 1 cylinder rocker arm (2).
(2) Remove No. 1 cylinder rocker arm (2) from cylinder head
(3).
(3) Remove bolt (4) from cylinder head (3).
CAUTION
Ensure end of injector rack bar is clean.
Failure to comply may result in faulty reading.
(4) Install the shortest (0.442 in.) dial indicator contact point
on dial indicator group.
(5) Install dial indicator group with bolt (5) on cylinder head
(3).
4-12
