TM 9-2320-365-34-2
4-5. FUEL TIMING CHECKS
This task covers:
a. Fuel Timing Checks
b. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Valve cover removed (TM 9-2320-365-20-2).
Fuel setting check completed (para 4-4).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Tools and Special Tools (Cont)
Tool Kit, Intl. Comb. Eng. (TM 9-2320-365-20)
Wrench, Torque, 0-60 N·m (Item 84, Appendix B)
Wrench Set, Socket (Item 75, Appendix B)
Personnel Required
(2)
a. Fuel Timing Checks.
CAUTION
Crankshaft must always be rotated to right to
align timing bolt with flywheel. Failure to
comply may result in damage to equipment.
NOTE
Use bolt on front of alternator to rotate
crankshaft for timing bolt installation.
(1) Rotate crankshaft to the right two complete revolutions.
(2) Remove plug (1) from timing hole on front of flywheel
housing (2).
NOTE
Steps (3) through (8) requires the aid of an
assistant.
Mark damper to engine front cover when timing
bolt engages with flywheel.
(3) Install timing bolt (3) in timing hole on front of flywheel
housing (2).
4-18
