TM 9-2320-365-34-2
4-6. TURBOCHARGER REPLACEMENT (CONT)
CAUTION
A gap of approximately 1/2 in. (1.3 cm)
between intake boot and alternator is
required. Failure to comply may result in
damage to equipment.
(21) Tighten clamps (31 and 32) to 36-48 lb-in (4-5 N·m).
(22) Position upper exhaust pipe (33) and clamp (34) on
turbocharger (2) with self-locking nut (35).
(23) Tighten self-locking nut (35) to 89-109 lb-in. (10-12 N·m).
(24) Position two bolts (36) in exhaust pipe bracket (37).
(25) Tighten two bolts (36) to 106-130 lb-ft (144-176 N·m).
4-30
