TM 9-2320-365-34-2
4-7. FUEL CONTROL LINKAGE REPLACEMENT (CONT)
(4) Verify fuel control linkage (1) rotates freely.
(5) Hold fuel control linkage (1) in place.
(6) Tighten four screws (4) to 24-36 lb-in. (3-4 N·m).
NOTE
If free movement of fuel control linkage is not
obtained, perform steps (7) through (9).
(7) Loosen four screws (4) on mounting brackets (5).
(8) Verify that fuel control linkage (1) will rotate freely.
(9) Tighten four screws (1) to 24-36 lb-in. (3-4 N·m).
c. Follow-On Maintenance.
Perform fuel injector synchronization (para 4-3).
End of Task.
4-34
