TM 9-2320-365-34-2
WARNING
Use care when removing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to comply may result in injury to
personnel.
(11) Remove retaining ring (16) from shaft mount (12).
(12) Remove shaft (15) from shaft mount (12).
(13) Remove grease seal (17) from clutch housing (4).
Discard grease seal.
b. Cleaning/Inspection.
NOTE
Replace any part that fails visual inspection.
(1) Wipe clean all metal parts.
(2) Inspect cylinder (1) for cracks or scoring.
Change 1
5-4.1
